Using The Stablesound ® Leature; Selecting The Optical Audio Output Format; Usingthe Locksmenu; Entering The Pin Code - Toshiba 32HLV66 Operating Manual

Using the StableSound® feature
The StableSound _'> feature limits the highest volume level to
prevent extreme changes in volume when the signal source
changes (for example, to prevent the sudden increase in
volume that often happens when a TV program switches to a
commercial).
To turn on the StableSound_ feature:
SS MENU
Pre._'s O and open tile Audio menu.
2 Highlight Audio Settings and press @.
3
In the StableSound field, select On.
Treble
Balance 0 ....... ,n...--..--..._
4
To save the new settings, highlight
Done and press @.
To revert to the factory defaults, highlight Reset and
press @.
Note: The RESET function returns your audio adjustments
to the following factory settings:
Bass ........ center (50)
Treble ....... center (50)
Balance ...... center (0)
StableSound .. Off
To turn off the StableSound feature:
Select Off in step 3 above.
Selecting the optical audio output format
You can use this feature to select the optical audio output
format when you connect a Dolby Digital decoder or other
digital audio system to the
Optical
Audio Out terminal on
the TV (try'0- "Connecting a digital audio system" in the
Installation Guide).
To select the optical audio output format:
SS MENU
Press O and open the Audio menu.
2 Highlight Audio Setup and press @.
3 In the Optical
Output
Format field, select either
Dolby Digital/Surround or PCM, depending
on your
device.
4
iiiiii ................................................................. ==VT?................ ¢7777? i¸i¸i¸i¸i¸i
.... gN
u {{
DVD Audio Stereo
Reset Dol_e
To save the new settings, highlight
Done and press @.
To revert to the factory defaults, highlight Reset and
press @.
Usingthe Locksmenu
The Locks menu includes the Enable Rating Blocking, Edit
Rating Limits, Channels Block, Input Lock, Front (control)
Panel Lock, and New PIN Code features. You can use these
features after entering the correct PIN code.
Entering the PIN code
SS MENU
Press O and highlight
the Locks menu icon.
2
Press V, which displays the PIN code entry screen.
• The Lock
System
screen (below) appears ira PIN
code has not been stored. Press the Channel Number
buttons to enter a new four-digit code, enter the code a
second time to confirm, and press @.
= - _ . [
Cancel Done
• The Locks/Active screen (below) appears if the PIN
code is already stored. Use the Number buttons to enter
your four-digit code and press @.
iiiiiiiiiiiiiiiiiiiiiiiii cancel
If the wrong PIN code is entered, the message "Incorrect PIN
code, please try again!" appears. Highlight Retry and press
@. Enter the code again and press @.
34