Usingthe Pcsettingfeature; Pc Audio - Toshiba 32HLV66 Operating Manual

Usingthe PCsettingfeature
You can view the image from a PC on the TV screen. The PC
must be connected to the TV's PC IN terminals
(ir_Fhlstallation Guide).
You can use the PC Settings feature to adjust the picture's
horizontal position/width, vertical position/height, clock
phase, and sampling clock.
If the edges of the picture are cut off. readjust the Horizontal
Position/Width and Vertical Position/Height. Itthe
picture is affected by interference, readjust the Clock Phase
and Sampling Clock.
To adjust the PC settings:
1
Repeatedly press @ to select PC input mode
(_ "Selecting tile video input source to view" page 23).
SS
MENU
Press © and open tile Setup menu.
3 Highlight PC Settings and press (/_.
sloo_ Timor
4
5
Slide Show Intolval 2 Sec
4_ EN_ OH _Ttl = EXIT
Note: lf a PC is not connected, this feature will be grayed
out in the Setup menu.
Press • or • to highlight the item you want to adjust.
Press • or• to make the appropriate adjustments.
0 ......................
Note: The screen is disrupted momentarily when
adjusting the PC settings. This is not a sign of malfunction.
• Horizontal Position:
Moves the picture left/right.
The adjustment range is within _+5from center.*
• Vertical Position:
Moves the picture up/down.
The adjustment range is within _+5from center.*
• Horizontal Width:
Adjusts the width of the picture.
The adjustment range is within _+5from center.*
• Vertical Height:
Adjusts the height of the picture.
The adjustment range is within _+5from center.*
• Clock Phase:
Helps to reduce noise and sharpen the picture.
The adjustment range is within _+2from center. 'E_"
• Sampling Clock:
Helps to reduce noise and minimize periodic vertical stripes
on the screen.
The adjustment range is within _+15from center.*
* The range of adjustment may vary slightly.
PC Audio
This function allows you to output the sound flom your PC (if
connected) or mute the sound fiom your PC and output the
sound from your HDMI connection. (=r_ Installation Guide)
To set the PC Audio:
1
2
3
SS MENU
Pre,;s
O and open the Setup
menu.
Highlight PC Audio.
Press • and then press • to select No or Yes.
Yes: Outputs the sound from your PC.
No: Mutes the sound from your PC, and outputs the
sound from the HDMI connection.
Note: The PC Audio switch setting influences the HDMI
Audio setting, tf it is set to No, the HDMI Audio setting
changes to Auto. if it is set to Yes, the HDMI Audio
setting is set to Digital and will be grayed out.
39