Using The Stablesound ® Feature; Selecting The Optical Audio Output Format; Using The Locks Menu; Entering The Pin Code - Toshiba REGZA 32HLV66 Operation Manual

Using the StableSound
The StableSound ® feature limits the highest volume level to
prevent extreme changes in volume when the signal source
changes (for example, to prevent the sudden increase in
volume that often happens when a TV program switches to a
commercial).
To turn on the StableSound
1
Press Y and open the Audio menu.
2
Highlight Audio Settings and press T.
3
In the StableSound field, select On.
Audio Settings
Bass
Treble
Balance
StableSound
Reset
4
To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.
Note: The RESET function returns your audio adjustments
to the following factory settings:
Bass . . . . . . . . center (50)
Treble . . . . . . . center (50)
Balance . . . . . . center (0)
StableSound . . Off
To turn off the StableSound feature:
Select Off in step 3 above.

Selecting the optical audio output format

You can use this feature to select the optical audio output
format when you connect a Dolby Digital decoder or other
digital audio system to the Optical Audio Out terminal on
the TV (- "Connecting a digital audio system" in the
Installation Guide).
To select the optical audio output format:
1
Press Y and open the Audio menu.
2
Highlight Audio Setup and press T.
3
In the Optical Output Format field, select either
Dolby Digital/Surround or PCM, depending on your
device.
Audio Setup
MTS
Language
Optical Output Format
DVD Audio
Reset
4
To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.
34
Chapter 5: Using the TV's features
® feature
feature:
®
100
100
0
On
Done
Stereo
English
Dolby Digital / Surround
Stereo
Done

Using the Locks menu

The Locks menu includes the Enable Rating Blocking, Edit
Rating Limits, Channels Block, Input Lock, Front (control)
Panel Lock, and New PIN Code features. You can use these
features after entering the correct PIN code.

Entering the PIN code

1
Press Y and highlight the Locks menu icon.
Locks
Enable Rating Blocking
Edit Rating Limits
Channels Block
Input Lock
Front Panel Lock
New PIN Code
Navigate
ENTER Select
2
Press b, which displays the PIN code entry screen.
The Lock System screen (below) appears if a PIN
•
code has not been stored. Press the Channel Number
buttons to enter a new four-digit code, enter the code a
second time to confirm, and press T.
Lock System
Please enter a 4 digit PIN code
Confirm PIN code
Cancel
The Locks/Active screen (below) appears if the PIN
•
code is already stored. Use the Number buttons to enter
your four-digit code and press T.
Locks
Please enter the 4 digit PIN code
* * * *
Cancel
If the wrong PIN code is entered, the message "Incorrect PIN
code, please try again!" appears. Highlight Retry and press
T. Enter the code again and press T.
Off
Off
Off
Back Exit
CH RTN EXIT
Done
Active
Done