Troubleshooting - Toshiba 57H82 Owner's Manual

Hide thumbs Also See for 57H82:
Table of Contents

Advertisement

Troubleshooting
Before calling a service technician, please check the following table for a possible cause of the problem and
some solutions.
Problem
Solution
"I_Vwill not turn on
• Make sure the power cord is plugged in, then press POWER.
• The remote control batteries may be dead. Replace the batteries.
No picture, no sound
• Check the antenna/cable
connections.
No sound, picture OK
• The sound may be muted. Press VOLUME.
• The station may have broadcast difficulties. "Dy another channel.
• Check that the SPEA_RS
function in AUDIO menu is set properly.
• Check that the AUDIO CENTER CHANNEL
_vitch is set
properly.
Poor picture,
sound
OK
• Check the antenna connections.
• The station may have broadcast difficulties. "l]:yanother channel.
• Adjust the PICFURE menu.
Poor reception of broadcast channels
• The station may have broadcast difficulties. "Dy another channel.
• Check the antenna connections.
• If you are using a VCR, make sure the "I_VFVCR button is set
correctly.
Cannot receive above channel 13
• Make sure the TVICABLE _vitch is set to the mode that
corresponds with the signal source type (cable company or outside
antenna).
Black box appears on the screen
• The dosed caption feature may be set to one of the "l_xt modes (T1,
T2, T3, or T4). "Ibm closed captioning OFE
Unable to select a certain channel
• The channel may be locked out with the CH LOCK feature, or
erased with the M)D/ERASE
feature.
Multiple im,_es
• The station may have broadcast difficulties. "Dy another channel.
• Antenna reception may be poor. Use a highly directional outdoor
antenna.
Poor color or no color
• The station may have broadcast difficulties. "Dy another channel.
• Adjust the TINT and/or COLOR in the PICTURE menu.
No stereo or SAP sound from a
• Make sure the MTS feature is set properly.
lmo_
MTS broadcast
The front panel buttons do not operate
• Check the FRONT PANEL LOCK feature.
The remote control does not operate
• Check whether the appropriate device mode is selected.
• Remove all obstructions between the remote control and the remote
control sensor in the "I_V.
• The remote control batteries may be dead. Replace the batteries.
Cannot access signal input sources
(Video 1, Video2, Video3,
ColorStream HD 1/HD2) and/or
Channels 3 and 4.
• Check the VIDEO LOCK feature.
55

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

42h8250h8265h82

Table of Contents