Table of Contents
Advertisement
Positioning the TV Set
10cm
30cm
Place the TV on a firm and flat surface, leaving a
space of at least 10cm around the set and 30cm
from the top of the set to the wall.
Antenna and Power Connections
Connect the power plug into the wall outlet.
1
Connect the antenna cable into the antenna
2
input terminal at the rear panel and wall
antenna socket.
•
The type of power plug provided may be different
from the above picture for some countries.
Securing the TV Set
10cm
Secure the TV set as shown above using screws
that are available in the market.
•
If you do not take the above safety measures, the
TV set could fail and result in personal injury or
physical damage.
Remote Control Batteries
Installation
1
2
Slide open the battery compartment cover in
1
the direction of the arrow.
Insert two AAA batteries. Make sure the
2
polarity match the indication inside the battery
compartment.
Slide close the battery compartment cover
3
until it clicks.
•
The remote control can be used within the range of
8 meters and about 15° in each direction from the
front of the remote control sensor. Make sure there
is no obstacle between them.
•
If the remote control is not used for a long period
of time, remove the batteries to prevent battery
leakage.
6
2 installation screws
(M4 x 20)*
TV rack
* The screws should be at least 20mm long
and they are available in the market.
Hide quick links:
Advertisement
Table of Contents
