If the gas logs have been factory installed they should not
need to be positioned. If the logs have been packaged
separately, refer to the following instructions.
2
1
NOTCHES
LOG #1 (SRV2045-700):
#1 up to the front tabs for NG. Slide it back until top of log touches the back of the fi replace for LP.
NOTCHES
LOG #2 (SRV530-719):
Slide the log backward until the back edge is in contact with the tab and parallel to log #1.
28
6
4
5
3
Place log #1 on the grate using the notches in the bottom of the log. Slide log
Place log #2 on the right two grate bars using the notches in the bottom of the log.
Heat & Glo • SL-550 / 750 / 950TV-D • 2053-985 Rev. J • 4/07
Log Set Assembly: LOGS-SL750-D
Models: SL-750TV-D, SL-950TV-D
Carefully remove the logs from the packaging.
CAUTION: Logs are fragile!
METAL TABS
1
2