Philips FPF42C128135UA-52 Service Manual page 9

4.1.6 LOGIC Board
3
2
4
Figure 4-11 LOGIC board removal (1/2)
Logic
Figure 4-12 LOGIC board removal (2/2)
Remove the circuit board by following the steps below. To
install the circuit board, reverse the removal procedure.
1. Unplug connectors [1].
2. Release the lock of the FPC connectors [2] and unplug the
signal cables.
3. Remove the screws [3] fixing the LOGIC board.
4. Remove the LOGIC board.
5. When installing the LOGIC board, put the board in such a
position that it is locked by the tabs [4] before fixing it with
the screws.
4.1.7 PSU Board
Figure 4-13 PSU board removal
Mechanical Instructions
3
1
4
G_16400_016.eps
310706
G_16400_017.eps
E_06532_032.eps
270706
Remove the circuit board by following the steps below. To
install the circuit board, reverse the removal procedure.
1. Unplug connectors [1].
2. Remove screws [2].
3. Remove the PSU.
180706
FHP PDP 4. EN 9