7. Circuit Diagrams and PWB Layouts
Not applicable.
8. Alignments
8.1
Voltage Setting Procedure
On the back of the PDP, in the top right hand corner, you find the Voltage Setting label:
This Voltage Setting label shows the following messages:
Table 8-1
Item
Adjustment items
1
Vs voltage adjustment
2
Va voltage adjustment
If the voltage adjustments Vs and Va on the Power Supply Unit must be performed, depends on the version of the Power Supply Unit.
Circuit Diagrams and PWB Layouts
Figure 8-1 Voltage setting label
Measurement point
Pins 8-9-10 of CN23 on the X-SUS board
Pin 1 of CN23 on the X-SUS board
FHP PDP
Adjustment value (conditions)
Voltage setting label indication value* ± 1%
Voltage setting label indication value* ± 1%
7.
EN 29
G_16400_034.eps
270706