Grounding Instructions; 110-120 V~ Grounded Tools: Tools With Three Prong Plugs - Central Machinery 6510 Set Up And Operating Instructions Manual

or other part that is damaged should
be properly repaired or replaced.
20. DIRECTION OF FEED. Feed work
into a blade or cutter against the di-
rection of rotation of the wheel only.

GrOundinG inStructiOnS

and death FrOm
incOrrect GrOundinG
Wire cOnnectiOn
read and FOllOW theSe
inStructiOnS:
110-120 V~ Grounded tools: tools
with three prong plugs
1. In the event of a malfunction or
breakdown, grounding provides a
path of least resistance for electric
current to reduce the risk of electric
shock. This tool is equipped with an
electric cord having an equipment-
grounding conductor and a ground-
ing plug. The plug must be plugged
into a matching outlet that is properly
installed and grounded in accordance
with all local codes and ordinances.
2. Do not modify the plug provided – if it
will not fit the outlet, have the proper
outlet installed by a qualified electri-
cian.
3. Improper connection of the equip-
ment-grounding conductor can re-
sult in a risk of electric shock. The
conductor with insulation having an
outer surface that is green with or
without yellow stripes is the equip-
ment-grounding conductor. If repair
or replacement of the electric cord or
plug is necessary, do not connect the
SKU 6510 For technical questions, please call 1-800-444-3353.
tO preVent
electric ShOck
equipment-grounding conductor to a
live terminal.
4. Check with a qualified electrician or
service personnel if the grounding
instructions are not completely under-
stood, or if in doubt as to whether the
tool is properly grounded.
5. Use only 3-wire extension cords that
have 3-prong grounding plugs and
3-pole receptacles that accept the
tool's plug.
6. Repair or replace damaged or worn
cord immediately.
Grounding
pin
125 V~ 3-prong plug and Outlet
(for up to 125 V~ and up to 15 a)
7. This tool is intended for use on a cir-
cuit that has an outlet that looks like
the one illustrated above in 125 V~
3-prong plug and Outlet. The tool
has a grounding plug that looks like
the plug illustrated above in 125 V~
3-prong plug and Outlet.
8. The outlet must be properly installed
and grounded in accordance with all
codes and ordinances.
9. Do not use an adapter to connect this
tool to a different outlet.
Page 5