Grinding Wheel Assembly - Central Machinery 6510 Set Up And Operating Instructions Manual

Washers
Shield
Supports
(4)
nut
(13)
FiGure 4 –
attaching the eye Shield
to Wheel cover
2. Remove the BOLT (12) and NUT (13)
from the upper grinder housing as
shown in Figure 4.
3. Align the EYE SHIELD Assembly
with holes and replace the WHEEL
COVER BOLT and NUT.
4. Adjust the EYE SHIELD to the de-
sired position and tighten the WHEEL
COVER NUT.
SKU 6510 For technical questions, please call 1-800-444-3353.
(14)
Bolt
(12)
eye
Shield
(3)

GrindinG Wheel aSSemBlY

remove Grinding Wheel
Wheel
cover (6)
Grinding
Wheel (2)
Washers
(14)
Bolt
(12)
Wheel
mounting
nut (10)
FiGure 5 – assembling the Grinder
1. Remove both GRINDING WHEEL
COVERS (6) by unscrewing their
BOLTS (12) and NUTS (13) as shown
in Figure 5.
2. Place adjustable wrenches on both
WHEEL MOUNTING NUTS (10).
3. To remove the right hand GRINDING
WHEEL (2) turn its WHEEL MOUNT-
ING NUT clockwise while keeping the
left hand WHEEL MOUNTING NUT
stationary. To remove the left hand
GRINDING WHEEL turn its WHEEL
MOUNTING NUT counterclockwise
while keeping the right hand WHEEL
MOUNTING NUT stationary.
4. Slide the WHEEL MOUNTING
WASHER (11) off of the SPINDLE
(9).
5. Slide the GRINDING WHEEL off of
the SPINDLE (9).
eye
Shield (3)
nut (13)
Spindle
(9)
Wheel
mounting
Washer (11)
Page 11