Central Machinery 45707 Set Up And Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Central Machinery Manuals
  4. Grinder
  5. 45707
  6. Set up and operating instructions manual
Central Machinery 45707 Set Up And Operating Instructions Manual

Central Machinery 45707 Set Up And Operating Instructions Manual

3/4" universal cutter/ grinder
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
3/4" UNIVERSAL CUTTER /
SET Up AND OpERATING INSTRUCTIONS
Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product described herein.
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE ThIS MANUAL.
Copyright
2001 by Harbor Freight Tools
©
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.
GRINDER
Model
3491 Mission Oaks Blvd., Camarillo, CA 93011
Cover revised 07g
45707
. All rights reserved. No portion of this
®

Advertisement

Table of Contents
loading

Related Manuals for Central Machinery 45707

Summary of Contents for Central Machinery 45707

  • Page 1 . All rights reserved. No portion of this © ® manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions or replacement parts, please call 1-800-444-3353. Cover revised 07g...

  • Page 2: Specifications Table

    ANSI approved full face mask. Also, wear ANSI approved hearing protectors when working with this product. ANSI approved safety impact eye glasses, full face mask, and hearing protectors are available from Harbor Freight Tools. REV 02b SKU 45707 For technical questions, please call 1-800-444-3353. Page 2...

  • Page 3: Specific Product Warnings And Precautions

    REpLACEMENT pARTS AND ACCESSORIES. When servicing, use only iden- tical replacement parts. Only use accessories intended for use with this product. Approved accessories are available from Harbor Freight Tools. MAINTAIN ThIS pRODUCT WITh CARE. Keep this tool clean and dry for better and safer performance.
  • Page 4 (California Health & Safety Code § 25249.5, et seq.) SKU 45707 For technical questions, please call 1-800-444-3353. Page 4...

  • Page 5: Product Overview

    Prior to operating the Universal Cutter/Grinder, make sure you familiarize yourself with the main parts components and their functions. (See Figure A, and Assy. Diagrams A, B, C, and F.) SKU 45707 For technical questions, please call 1-800-444-3353. Page 5...

  • Page 6: Parts Components

    Collet (20B). Insert the tool into the Collet (20B). Then, turn the Front/Back Micro Adjusting Handle clockwise to lock the tool into the Collet. (See Figure A, and Assy. Diagram B.) REV 02b, 07g SKU 45707 For technical questions, please call 1-800-444-3353. Page 6...

  • Page 7: Dressing The Grinding Wheel

    Caution: Prior to beginning the wheel dressing procedure, make sure the Power Switch (1F) is in its “OFF” position and the Grinding Wheel (21A) has completely stopped spinning. (See Figure A, and Assy. Diagram F.) SKU 45707 For technical questions, please call 1-800-444-3353. Page 7...
  • Page 8 Assembly outward, away from the flat side of the Grinding Wheel, and raise the Wheel Dresser Handle (5A) to its original position. (See Figures A, B, and Assy. Diagrams A, and F.) SKU 45707 For technical questions, please call 1-800-444-3353. Page 8...

  • Page 9: Cleaning And Maintenance

    NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACE- MENT PARTS THERETO. SKU 45707 For technical questions, please call 1-800-444-3353. Page 9...

  • Page 10: Parts List A

    Spindle Sleeve Plate Belt Wheel Right/Left Degree Ring ASSEMBLY DIAGRAM A Note: Some parts are listed and shown for illustration purposes only, and are not avail- able individually as replacement parts. SKU 45707 For technical questions, please call 1-800-444-3353. Page 10...

  • Page 11: Parts List B

    Fixed Reading Plate Handle Collet Seat Screw Oil Ball Right/Left Fixed Screw Collet Handle Seat Gear Handle Plate Turning Seat Degree Bolt Sleeve Tightening Nut 3-Speed Fixed Handle ASSEMBLY DIAGRAM B SKU 45707 For technical questions, please call 1-800-444-3353. Page 11...
  • Page 12 Description part Description part Description Bolt Slip Block Turn Plate Slip Block Bolt Bolt Gradient Plate Bolt Collet Spindle Bolt Handle Twist Drill Spindle Eccentric Ring ASSEMBLY DIAGRAM C SKU 45707 For technical questions, please call 1-800-444-3353. Page 12...
  • Page 13 Fixed Board Bolt (M6 x 12) Bolt (M6 x 20) Bolt (M6 x 20) Bolt (M4 x 12) Fixed Board Bolt (M4 x 8) Bolt (M4 x 8) ASSEMBLY DIAGRAM D SKU 45707 For technical questions, please call 1-800-444-3353. Page 13...
  • Page 14 Connect Block Bolt (M6 x 16) Bolt (M6 x 16) Bolt (M5 x 12) Adjusting Level Adjusting Level Bolt (M8 x 25) Sleeve Slip Block Tightening Nut ASSEMBLY DIAGRAM E SKU 45707 For technical questions, please call 1-800-444-3353. Page 14...
  • Page 15 LIST F part Description Power Switch Transformer Lamp Lamp Bulb Power Failure Indicator Motor ASSEMBLY DIAGRAM F SKU 45707 For technical questions, please call 1-800-444-3353. Page 15...

  • Page 16: Limited 90-Day Warranty

    LIMITED 90 DAY WARRANTY Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this prod- uct is free from defects in materials and workmanship for the period of 90 days from the date of purchase.

Table of Contents