Lanier LD225 Function Manual page 79

To change the stamp position
A
Press [Change].
B
Select the position, and then press
[OK].
Specifying the first printing page and
start number
If you selected (P1, P2..., -1-,-2-...,
P.1, P.2..., 1, 2..., )
Note
❒ The following explanation uses P1,
P2... as an example. The steps are
the same for other selections.
A
Press [Change] on the right side.
B
Press [First Printing Page], then en-
ter the original page number from
which to start printing using the
number keys, and then press the
{#} key.
Note
❒ To change the number entered,
press [Clear] or the {Clear/Stop}
key, and th en enter a new
number.
C
Press [Numbering from/to], enter the
number of the page from which to
s t a r t n u m b e r i n g u s i n g t h e
number keys, and then press the
{#} key.
Note
❒ The example below shows the
first printing page as "2"and the
start number as "3".
D
Press [Last Number], enter the
number of the page to stop num-
bering using the number keys,
and then press the {#} key.
Note
❒ If you want to number all pages
to the end, press [to the end].
E
When page designation is com-
plete, press [OK].
F
Press [OK] 3 times.
Copier Functions
2
GCANPE2J
69