Lanier LD225 Function Manual page 69

Border Erase
A
Press [Edit/Stamp].
B
Press [Erase].
C
Set the erase border width.
Selecting [Same Width]
A Press [Same Width].
B Set an erase border width us-
ing [n] and [o].
Note
❒ To change the value entered,
press [n] and [o] to set the
new value.
C Press [OK].
Selecting [Diff. Width]
A Press [Diff. Width].
B Press the key for the border
you want to change, and then
set the erase border width us-
ing [n] and [o].
C Press [OK].
D
Press [OK].
E
Place originals, and then press the
{Start} key.
Center Erase
A
Press [Edit/Stamp].
B
Press [Erase].
C
Press [Center].
D
Set the erase center width using
[n] and [o], and then press [OK].
E
Press [OK].
F
Place originals, and then press the
{Start} key.
Copier Functions
2
59