Table of Contents
Advertisement
ASSEMBLY/PRE-OPERATION
CHECK TIRE PRESSURE
INSTALL DISCHARGE CHUTE/CHUTE
ROTATE R HEAD
(See Fig. 7)
NOTE: The multi-wrench provided in your parts bag may
be used to installthe chute rotater head.
1.
Place discharge chute assembly on top of chute base.
with discharge opening toward front of snow thrower.
2.
Positionchute rotaterhead overchute bracket, ifneces-
sary, rotatechuteassemblytoalign square and pinon un-
derside ofchuterotaterhead with holes in chute bracket.
3.
With chute rotater head and chute bracket aligned,
position chute rotater head on pin and threededstud
of mounting bracket.
4.
Install 3/8 washer and Iocknut on threaded stud and
tighten securely.
The tires on your snow thrower were overinflated at the fac-
tory for shipping purposes. Correct and equal tire pressure
is important for best snow throwing performance.
• " Reduce tire pressure to 14-17 PSI.
CHUTE
ROTATER
•PIN
STUD
ROTATER HEAD
MOUN_NG
BRACKET
RG. 7
7
Advertisement
Table of Contents
