Assembly / Pre-Operation - Poulan Pro PR8527ESA Owner's Manual

ASSEMBLY / PRE-OPERATION
INSTALLTRACTION DRIVE CONTROL ROD
(See Figs. 3 and 4)
The traction drive control rod has the long loop on the end
of the spring as shown.
1. Slide rubber sleeve up rod and hook end of spring into
pivot bracket with loop opening down as shown.
2. With top end of rod positioned under leftside of control
panel, push rod down and inserttop end of rod into hole
In drive control bracket. Secure with retainer spring.
INSTALL AUGER CONTROL ROD (See Figs. 5 and 6)
The auger control rod has the short loop on the end of the
spring as shown.
1. Slide rubber sleeve up rod and hook end of spring into
control arm with loop opening up as shown.
2. With top end of rodpositioned under rightside of control
panel, push down on rod and insert end of rod into hole
in auger control bracket. Secure with retainer spring.
PIVOT
BRACKET
TRACTION DRIVE
CONTROL ROD
RUBBER
SLEEVE
CONTROL
ARM
AUGER
FIG. 3
TRACTION DRIVE RETAINER
CONTROL LEVER SPRING
CONTROL
BRACKET
FIG. 4
RG. 5
AUGER AUGER
CONTROL CONTROL
ROD RETAINER LEVER
SPRING
CONTROL
BRACKET
FIG. 6