Pentax OPTIO 33L Operating Manual page 58

Shutter release button
_Four-way controller
OK button
MENU button
Using the LCD monitor, you can take 3D pictures to be viewed by the
parallel method or cross method (p.60). Print out the 3D picture and look at
it through the 3D image viewer provided. It will appear in three dimensions.
The default setting is Parallel to view with the 3D Image Viewer. If you
do not need to switch to Cross, proceed to step 5.
1
Press the MENU button.
The [1_1Rec. Mode] menu will be displayed.
2
Press the four-way controller (A •) to _Ro_.Modo ............
select [3D Mode]. /o,_ ira,zoo,,, _1
Instant Review 0.5s
;:
3
Press the four-way controller (• _,) to /so_t,,,_ _ II
I |Ex. Bracket Step -+0.3 _11
l WB Bracket Ste_ ±±
select Cross.
You can also view it without the image viewer. I _Ex_t _:ok I
4
Press the OK button.
The screen returns to the 3D image mode.
5 Press the four-way controller (•) in Capture Mode.
The virtual mode dial is displayed.
6
Press the four-way controller (A • ) to select the 3D
Image mode (1_).
li