Handling The Camera - Pentax OPTIO 33L Operating Manual

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_
iiiiiii !
• Always confirm that the camera is working properly when the camera has not
been used for a Iong time, or before important occasions (weddings, trips,
etc.). PENTAX is not responsible for consequential damages (costs incurred
for photography, lost profits, etc.) arising from failure of this product.
• The lens on this camera is not exchangeable. The lens is not removable.
• Do not clean the product with organic solvents such as thinner, alcohol, or
benzene.
• Do not subject to high temperatures or high humidity. Do not leave the camera
in a vehicle, as the temperature can get very high.
• Do not store the camera with preservatives and chemicals. Storage in high
temperatures and high humidity can cause molding. Remove from ease and
store in a dry and well-ventilated location.
• This camera is not waterproof, and cannot be used in the rain or where the
camera could get wet.
• Do not subject the camera to strong vibrations, shocks, or pressure. Use a
cushion to protect the camera from vibrations of motorcycles, automobiles, or
................................................................ ships.
,,,, . ........................................................ • The temperature range for camera use is O°C to 40°C.
,,,,,............................................................... ................................................... • The LCD display may appear black under high temperatures, but will return to
,,,,,,, . ............................................ normal as temperatures normalize.
,,,,,,,,.......................................................... ....................................... The LeD display may respond more slowly at low temperatures. This is due to
...................................................... liquid crystal properties, and is not a fault.
.................................................... Periodic inspections are recommended every one to two years to maintain
................................................ high performance.
.............................................. Sudden temperature changes will cause condensation on the inside and
.......................................... outside of the camera. Place the camera in your bag or a plastic bag, retrieving
....................................... the camera after decreasing the temperature difference.
• Avoid contact with garbage, mud, sand, dust, water, toxic gases, or salts.
These could cause a camera breakdown. Wipe dry any rain or water drops on
the camera.
• See "Precautions When Using a CF Card" (p.16) for details on the compact flash
memory card (CF Card).
• Please do not press forcefully on the LeD monitor. This could cause breakage or
malfunction.
• When you rotate the LCD monitor, please rotate it carefully in the correct direction,
and do not apply excessive force. This could damage your camera.