Pentax K-7 Operating Manual page 48

2
3
4
Position the subject on the
monitor and press the AF
button.
The autofocus system operates.
When the focus mode is set to
MF,
turn
the focusing ring until the subject is
clearly visible on the focusing screen.
" .................. t 4/
Press the shutter release button fully.
Recording of the movie starts.
Press the shutter release button again.
Recording stops.
, when [Sound] isset to _ (On) the Camera operation sounds are also
recorded. When recording a moviel mount the ¢amera onto a tripod and do
not 0perate the camera while recording.
, While recording a movie, the aut0f0cus system does not operate.
' The flash is not availablel
• !f YOUwant to view a movie 0nan external monito[ while recording it, connect
the camera to an AV deyice with an HDMI terminal (p.235). yo u cannot
output a movie using the PC/AV terminal while recording.
• You can record movies continuously up to 4 GB or 25 minutes. When the SD
Memory Card is full. recording stops and the movie is saved.
• If you intend to shoot continuously for a long period, use of the AC adapter
kit K-AC50 (optional) is recommended. (p.47)
• You can also use the optional remote control to control recording operations.
(p.138)
• When recording movies, only the White Balance and Custom Image (other
than Fin e Sharpness) settings can be used.
• The sensitivity is fixed to [AUTO].
• If a high temperature is reached inside the camera during movie recording,
the recording may be terminated for the sake of circuit protection.