Pentax K-7 Operating Manual page 62

When an Incorrect Language is Set
When you mistakenly select a language in the [Language/-#-#_] screen
and proceed to the [Date Adjustment] screen, you can perform the
following operations to set the correct language.
If you have proceeded to switch the camera to Capture mode (and the
camera is ready to take a picture), perform the following operations from
Step 2 to set the correct language.
I Press the
MENU
button once to
display the guides on the
monitor.
2
The screen shown on the right is an
example of the guides displayed. The
displayed screen will vary depending on
the selected language.
The guides appear on the monitor for 3
seconds.
Press the MENU button once.
[1_ 1] is displayed in the upper tab.
Press the four-way controller ( • ) five times.
[_ 1] is displayed in the upper tab.
4 Press the four-way controller (•) to select [Language/
_; Press the four-way controller (•).
The [Language/-_] screen appears.
5 Use the four-way controller (• • • • ) to select a desired
language and press the OK button.
The [_ Set-up 1] menu in the selected language appears.
Refer to the following pages and set the desired city for [Hometown]
and the current date and time as necessary.
• To change the hometown: "Setting the World Time" (p.258)
• To change the date and time: "Changing the Date Display" (p.258)