Orien FS260IM User Manual page 4

• Plug into a grotmdcd 3-prov.g outlet. Do not remove grourdi_ proog, do not u_ an. adv.p_.
ard do not use an extcmion cord.
• It is recon-an_aded that a separate circuit, serving oniy)'our ice maker_ be provided, Use
receptacles that cannot be tunm] off by a switch or pul! chain.
,, Do_. n ot eorarect or dJsc_t the electric plug when your _ are w_.
- Never unplug the ice .maker by puUhag on the power cord. Always grip the plug firmly and puii
straight out ii'omthe outlet.
• Nev_ c!e_u ice mak_ parts v,_h _Tanable fluids. Do ___"t_am or usc g_,solh-_e or other
flammable x,apo_ and nqmas in the vicinity of tins or any other appliance. The tomes can
create a fire hazard or explosion.
• Belbre proceeding with cleaning and maintermrme oper_dions, make sure the power !ine of the
unit _ discmnnccigd and tim water iine is shut off. (EXCEPTION: When cleaning the
_" s ice making and water systems_ see pages 18 - ! 9.)
• Before operating, put al! the enclosure panels back into their original places.
• Do not touch the evaporator with your hand when the machine is operating.
- Unplug the ice ma_k_ or discomaeet power bef.:yr¢ c!eaning or sere_icing. Failu_ne to do so can
result in eie_ctrical shock or _.
• Do not attempt to repair or tepiaee any peat ofyo ,ur ice maker unless it is speeifieaiiy
recommended in this manual. All other servicing should be referred to a qualified !echniciano
- Use two or n_are _pie !o n,K)ve and install ice maker. Failure to &) _) can result in back or
other i@ay.
• To ensure proper ventilation for yo_ ice maker, the front of the _ must be complete!y
unobstructed, Choose a well-ventilated ,area with temperatures above 5 ..IWF (!O_C) and below
100°F (38°C). This u._ _o_J-ST _ i._talled ha an area protected from €.he elements, _ch as
wind, rain, water
spray or
drips.
• Th_ ice mak_ should not be locatty3 next to ow-_ns, grills or other sounds ofhig_h b,_,_at.
- The ice maker must be _ed with all electrical and water connections in accordance with s*.me
and local cedes. A standard electrical supply (! ! 5 VAC only, 60 Hz, ! 5 A), properly grounded in
accordm_e with the National Electfiea! Code and local codes and ordinm'_es, is requ_.
- Do not kink or phach power supply cord or drain lines between ice maker and c_b'met.
° The fuse (or circuit bre_,&¢r) size shouid be i 5 amperes.
g it is im!mrtant for the ice maker to be leveled in order to work properly, You may need to make
level lt o
serial adjusLments to ' :"
- A!! insta!lations must be in accordance with local plumbing code requirements.
• Make certain_ that the hoses are not pinched or kinked or damaged during installation.
• Check for _aks after connection.
,, Remm,'e the packing malerL-zalz _ e_ the ice maker before using.
° Turn on the water supply tap before switching on the ice maker. Never turn the water supply
tap offvchen the ice maker is working.
- Except to take ice .c-_,_ m the unit, keep t__he door closed in ord_ to reduce ice melting ,-rod to
promote proper ice formation.