Orien FS260IM User Manual page 10

Automatic commercial ice cube machine
Hide thumbs Also See for FS260IM:
Table of Contents

Advertisement

- To ensm'e pro!_r ventilation
for your ice maker, the front of the m-dr must be completely
unobstnacm&
• When installing the ice m_._k_ under a counter, follow the recommended
spacing dimensions
,shown. Allow at least 6" (150 ram) clearance at rear, and t" (25 ram) atthe sides and at the top
for proper air circulalion_ The installation
should allow tF_ i¢_ maker, to b_ pulled forwa_ for
servicing ff necessary.
,_Choose a well-ventilated
area with temperatures above 50°F (t0°C) and below tO0°F (38°C).
This trait MUST be installed in an area protecte_
_m
the _e._
such as wind, rain, water
spray or drips.
• The unit should not be ioeated ,_
to ovens, grills or other sources of high heat.
, Installation
of the ice maker requires a cold wat,r supply bale( of 3/8" (9,5 ram) soft copper
tubing with a shut-offvaive.
° The ice maker requires a continuous water supply with a minimum
presstn_
of 15 psig and a
static pressure
not to exceed 80 psig. The t_
of th_ w-_,gr fozdg'ag into the ice maker
should be bec.ween 41 °F (5°(?) and 90"F (32"C) fbr proper operation.
Nomlal
operaling
ambient temperature
should be be_vegn
50°Y
(10°C) and IO0°F (38°C L Normal
operath\-_ water temperatme
sltoutd be be_veen
4 !°F ( 50(") and 90°F (32°C L Operation
of
tim ice maker tbr extended periods
outside of these normal
temperature ranges may affect production capacity.
|
• [17 IS STRONGLY
RE,¢dOMMENDED
TO USE A VeATER FILTE_
A FffLi_i{_
Lif i'i"
IS OF THE PROPER
.TYPE., CAN $_MOVE
TASTE AND ODO!_q AS WELL AS
PARTICLES
AND CAN PROLONG
THE LIFE OF THE MACHINE.
• The ice. maker must be installed with all eie_xrical and water connections in accordance
with
stae ._x! !ocM code.s.
-- The "_,it should be located on a firm _
level smqhce, h is important ibr tim ice amker m be
level in order to work properly. !f needed, you can adjust _.e height of _
ice w_k._ by
rota_ng the. _e*_. See the Leve!ing:the
Ice Maker sec*_.
Electrical
Requirements
Eleclvical
Shock Hazard
Phtg imo a m'omlded 3-prong omlet.
Never remove the _'oundh\_,
prong fi'om the phtg.
Never use an adapter.
Never use an extension
cord.
Failure to follow these instructions
can result in £u'e.
electficM shock ov death,

Advertisement

Table of Contents
loading

Table of Contents