Orien FS260IM User Manual page 12

IMPORTANT:
1. All installations rm_ be in accordance wilh tocai ptumbi,'rg code requirements.
Professiomz! installation is recommended
2. Water inlet fitting: 3/8" FTT __?ema!e Pipe _read); drain line connection: i/2" FPT.
3. Make certain you have a suitable water supply hose and two suitable drain hoses, and that
the hose._ are not pinched, kinked or damaged during irL_tallatior_
4. Check [br leaks after ccmnectior_
Tools required: 3/8" open-etxl wrench, Phillips screwdriver
Cmmcatiag the wat_ line:
!. Turn oft'mare water supply.
2. Find a water supply line _ fire _n location. Tim _ sl_uld be k_s thaa the
length_ of the water supply hose.
a A shut-offvalve must be-instatl_l to ti_ main wa_ _tppi_:
.d,
4, Connect the water supply imse to tap and water inlet valve. Tighten firmly by harM, then
iq_3-B_]] tUI3"l "*"
w]_daV, T ench.
5. Connect one water drain hose to ice maker drain line eonm'et'nm. Tilden fm_y by hand,
f!_ev,_-_l_!f t_n vcit_h wre_h.
6. Connect anot_r water drain hose to bin drain line connection. TJgi_e,a _ by hand, tJaen
one-ha_turn with wrench.
7. Tram on main wat_ s uppiy and tap. Check for water s ul_ply connection leaks. Tighten every
c_maection (including connections at the wat_ inlet).
NOTE: if using a water filter, be sure to follow the filter mantffaetureFs directions.
In,ta!laaon Types
This _e cube machine has been desigaexl to be eaclosed (as under a cabinet), it c,'mai_ be. fi'ee-
standing (_iv_ L_ supplied stnbi!ity braek_.s) or buiR-_ (sealed to the floor). !n every case,
_cre must be adcquaw air space around the unit forvcatitation purposcs (see diagrams on page 8).
End_ I_:
,am enclosed installation will allow you to install the ice cube machine -.rudera counter or in a
kitchen cabinet ]_rovided the required e!eamnce space arour_ the ice maker is respected. You
must follow the stated instructions for
a. Electrical requirements
b. Water mpp!y
Free-standing !nsmUation:
The ice cube mac -hine can be installed to be free-s_gting in any place you desire provided you
have access to a water supply, This installation _hasthe same requiremems as an enclosed
• _ |I *
mstauatlon, p!us you muSt also follow the stated instrttc_ns for tm'tatling the Stability Brackets.
Bni|t-in ln_!ia.m...
!f this met_hod of installation is chosen, it wilt still be nec_ to allow adequaa: vemLation
space around the unit. The iouowang addltio_aal items must be obser-ved.
i. ehce the ice cubemachinein front of_ _ion location. Raise the nmb2ne a_
place
it
on the floor or on a platform depending on your installation requirements.
2. The wa_er supply _ne must be. plumbed before eonnecti_ to the ice maker,
3: Turn on the main water supply and tap. Check for v,_ter supply comaeetion leaks. Tighten
every connection (including connections at the water inlet).
4, If the e!eetrieai outlet for the ice maker is behind the eabineL Viug in the ice maker,
5, Push the ice maker into position_
_,_binet _o ,_ noor _ah an approved cau_ comtm__md.
II