Technical Information - Orien FS-65IM User Manual

Automatic ice makers
Hide thumbs Also See for FS-65IM:
Table of Contents

Advertisement

Available languages

Available languages

it is your
responsibility
and
obligation
to have
it replaced
with
a properly
grounded
3-prong
wall
outlet.
The
ice maker
should
always
be plugged
into
its own
individual
electrical
outlet
which
has a voltage
rating
that matches
the rating
label
on the appliance.
This provides
the best
performance
and also prevents
overloading
house
wiring
circuits
which
could
cause
a fire hazard
from
overheated
wires.
Never
unplug
your
ice maker
by
pulling
on the power
cord.
Always
grip
the plug
firmly
and pull
straight
out
from
the
outlet.
Repair
or replace
immediately
all power
cords
that
have
become
frayed
or
otherwise
damaged.
Do not use
a cord that
shows
cracks
or abrasion
damage
along
its
length
or at either
end. When
moving
the ice maker,
be careful
not to damage
the power
cord.
Extension
Cord
Because
of potential
safety
hazards
under
certain
conditions,
it is strongly
recommended
that you do not use an extension
cord with this ice maker.
Technical
Information
Model
Rated
power
Ice-making
rated current
Ice-harvest
rated current
Refrigerant
High side pressure
Low side pressure
Width x depth x height
Unit weight
Ice-making
capacity
FS-65IM
115VAC
- 60Hz
470W
6.7A
11.2A
R134a,
6.88 oz.
320 psi
120 psi
16.5">:21.3">:32.5"
91 lbs
Up to 65 lbs/day*
FS-85IM
115VAC
_ 60Hz
520W
7.3A
11.7A
R134a,
8.96 oz.
320 psi
120 psi
22.1">:21.3">:32.5"
106 lbs
Up to 83 lbs/day*
FS-110IM
115VAC
_ 60Hz
580W
7.5A
11.8A
R134a,
9.92 oz.
320 psi
120 psi
22.1">:21.3">:32.5"
102 lbs
Up to 110 lbs/day*
The technical data and performance
index listed above should be used for reference only.
They are subject to change.
* The actual quantity
of ice produced
per day can vary with room and water conditions.
5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fs110imFs-85im

Table of Contents