Table of Contents
Advertisement
14. Attach the Headrest (20) to the Headrest
Frame (9) with two M6 x 18mm Button
Screws (55), an M6 x 60mm Button Screw
(56), and three M6 Washers (62).
Attach the Backrest (21) to the Backrest
Frame (8) in the same way.
14
55
62
15. Attach a Handle (12) to the Left Frame (4)
with two M10 x 80mm Button Bolts (52), two
M10 Curved Washers (50), and two M10
Locknuts (65).
Attach the other Handle (12) in the same
way.
Make sure that all parts are properly
tight-
ened before you use the inversion table.
15
12
ii
I
iI ,
_' ,,','
'1
"1"
'_
j12
/ /
A WARNING:
HOW TO LOCK THE INVERSION TABLE
FOR STORE DISPLAY OR TO PREVENT
UNSUPERVISED
USE
When the inversion table is displayed
in a
store, or when it is not in use, it should
be
locked to prevent unsupervised
use. First,
insert the threaded
end of the Lock Pin
(35) into the Center Base (3), and position
the other end of the Lock Pin on top of the
Leg Frame (10). Then, tighten an M10
Locknut
(65) onto the Lock Pin.
65
\
12
Hide quick links:
Advertisement
Table of Contents
