NordicTrack T5zi NTL61009.0 User Manual page 11

11. Firmly tighten the four 5/16" x 1" Patch Bolts (3)
and the two 5/16" x 1" Patch Bolts (4) (only one
side is shown).
With the help of a second person, hold the con-
sole assembly near the Right Handrail (83) and
the Left Handrail (not shown).
Connect the Upright Wire (87) to the console
wire. See the inset drawing. The connectors
should slide together easily and snap into
place. If they do not, turn one connector and try
again, iF THE CONNECTORS ARE NOT CON-
NECTED PROPERLY, THE CONSOLE MAY
BE DAMAGED WHEN YOU TURN ON THE
POWER. Remove the wire tie from the Upright
Wire.
Connect the ground wire from the console as-
sembly to the Console Ground Wire (109).
11
Console
Wire
\
Wire
Tie
Console
Assembly
Ground Wire -_
(_ c% -
_---83
12. Set the console assembly on the Left and Right
Handrails (82, 83). Be careful not to pinch any
wires. Insert the excess Upright Wire (87) into
the Right Handrail.
Attach the console assembly to the Crossbar
(107) with six #8 x 3/4" Screws (1). Start all six
Screws before tightening any of them.
Attach the two Console Clamps (105) to the
console assembly with four #10 x 3/4" Black
Screws (53).
12
87
107 i
3
1 1
Console
Assembly
11