Do you have a question about the T5 Zi Treadmill and is the answer not in the manual?
Questions and answers
Sallie
May 28, 2025
Belt stops while walking or running motor still on
1 comments:
Mr. Anderson
May 28, 2025
The walking belt on a NordicTrack T5 Zi Treadmill could stop while the motor is still running due to the belt being overtightened or off-center. If overtightened, treadmill performance may decrease and the belt can become damaged. If the belt is off-center or slips, it may also stop during use. In such cases, adjustments to the idler roller bolts may be necessary to correct belt tension or alignment.
Summary of Contents for NordicTrack T5 Zi Treadmill
Page 3
Always wear ath- letic shoes. Never use the treadmill with bare feet, wearing only stockings, or in sandals.
Page 6
5/16" Star #10 Star 3/8" Nut (10)–3 3/8" Star Washer (13)–2 Washer (12)–4 Base Foot Spacer Washer (11)–4 (94)–2 #8 x 1" Screw #10 x 3/4" Screw #8 x 3/4" Screw #8 x 1" Tek Screw (1)–10 (53)–4 (2)–4 (5)–4 5/16"...
Need help?
Do you have a question about the T5 Zi Treadmill and is the answer not in the manual?
Questions and answers
Belt stops while walking or running motor still on
The walking belt on a NordicTrack T5 Zi Treadmill could stop while the motor is still running due to the belt being overtightened or off-center. If overtightened, treadmill performance may decrease and the belt can become damaged. If the belt is off-center or slips, it may also stop during use. In such cases, adjustments to the idler roller bolts may be necessary to correct belt tension or alignment.
This answer is automatically generated