Advertisement
52. Insert a 1/4" x 2 1/2" Carriage Bolt (45) into the center
hole in a Seat Plate (65). Attach the Seat Plate to a
Seat (13) with two 1/4" x 3/4" Bolts (49). Insert the
1/4" x 2 1/2" Carriage Bolt (45) into the indicated hole
in the Press Seat Frame (7) and secure it with a 1/4"
Flat Washer (71) and a 1/4" Nylon Locknut (68).
Secure the other end of the Seat (13) with a
1/4" x 2 1/2" Bolt (79) and a 1/4" Flat Washer (71).
52
53. Attach the Curl Pad (91) to the welded plate on the
Butterfly Front Leg (3) with two 1/4" x 3/4" Bolts (49).
Make sure that the flat edge of the Curl Pad is fac-
ing as shown,.
53
Flat Edge
91
3--
49
54. Remove the three preassembled
1/4" x 5/8" Screws
(95) from the Shroud (34). Attach the Shroud to the
indicated bracket on the Weight Base (5) with two
1/4" x 5/8" Screws.
55. Attach the Shroud (34) to the top of the Weight
Upright (9) with a 1/4" x 5/8" Screw (95).
55
95
22
Advertisement
