Craftsman 247.886913 Operator's Manual page 11

10. Checkthatall cablesare properlyroutedthroughthecable guide "_
on the engine.See Figure10.
NOTE:If the chute controlis not assembledcorrectlyit will not move
freelynor will it movefully to the rightand left.
11. Theextensioncordfor the electricstarteris fastenedwith a cable
tie to the rear of theauger housingfor shippingpurposes.Cut the
cabletie and removecordbeforeoperatingthe unit.
SET-UP
Shear Pins
Holesare locatedin the handlepanelfor convenientshearpin storage.
See Figure11.Referto the Operationsectionfor moreinformation
regardingshearpin replacement.
/
i
/
!
I
Figure10
f
Figure11
J
11