To Stop Engine - MTD Series 020 Operator's Manual

Operating
WARNING
When movingthrottle
I control lever,be care-
i ful of heated surfaces
i and sharp edges on
muffler guard.
TO STOP ENGINE
1. Movethrottlecontrolleverto slow (turtle) position.
Wheneverpossible,graduallyreduceenginespeed
beforestoppingengine.
2. Movethrottlecontrolleverto STOPor OFF position.
3. Disconnectsparkplug wireand groundit to the
retainingpost to preventaccidentalstartingwhilethe
equipmentis unattended.
__k WARNING:When moving throttle con-
trol lever,be carefulof heatedsurfaces
and sharpedgeson mufflerguard.
Outer Fla
Figure4-4
Figure4-5
Buttons
TO EMPTY BAG
1. Unhookbag strapsfrom the lowerhandle.
2. Unsnapbagclip from the top of lowerhandle.See
Figure4-4.
3. Graspbag handlewith one hand and pull lock rod
on mountingbracketwith otherhandtowardengine
to release.
4. Lift bagoff back of unit.
5. Twistthetwo buttonson the backof the bag to un-
lock and emptycontents.See Figure4-5. Hold bag
handleand bag clip whileemptyingthe contents.
6. Compressbag openingand foldinnerflapover
opening.
7. Foldouterflap overinner flap and insertbuttonson
the bag throughmetaloutlets.See Figure4-5.
8. Twistthe buttonsto lock bag. Placebagback onto
unitas instructed i nthe AssemblySection.
12