Magnavox ZV457MG9 Owner's Manual page 50

Connect the external device properly to the unit by using input jacks either L2 (Front) or L1 (Rear).
When connecting an external device of monaural output to this unit, use AUDIO L jack of L2 (Front) or L1 (Rear).
Use S-video or the RCA audio/video cables for this connection.
external device
(camcorder, VCRetc.)
S-vide(
cable
cable
i
®®®
or
RCA
audio cable
front of this unit rear of this unit
i
3
4
Use [A /V] to select "Video Input",
then press [OK].
Use [A / V] to select desired external
input, then press [OK].
Press [SETUP] and use [A /V] to
select "General Setting", then press
[OK].
"General Setting" menu will appear.
2
Use [A / V] to select "Video", then
press [OK].
Submenu will appear.
5
6
Use [A / V] to select the input jack
type to connect, then press [OK].
If you want to use VIDEO IN jack, select "Video
In".
If you want to use S-VIDEO IN jack, select
"S-Video In".
Press [SETUP] to exit.
48 EN