Magnavox ZV457MG9 Owner's Manual page 45

4
5
'IIIIIi M ER RECORDING
Use [A / • / <I / I_] or [the Number
buttons] to enter the start and end
time, then press [1_].
Use [A / •] to select a recording
mode•
• You cannot make a program which recording
time exceeds 12 hours.
Use [A / • / <I / I_] to select analog
("- - -') / digital ("DTV') mode
or
external input (L1 / L2), then
press
[p,-].
e.g.) external input mode
To record from external input (e.g., cable/
satellite box), select L1 or L2.
Use [A IV] or [the Number buttons] to select
the channel number to record, then press
[p_].
For digital mode, select both major and minor
channels. Refer to "How to select a channel
number for the timer recording" on page 44
for more details.
e.g.) analog mode
e.g.) digital mode
Refer to "Recording Mode" on page 38.
• When recording to DVD, you can checkthe
remaining recordable space of the disc when
you select the recording mode.
Auto recording mode select (DVD only)...
When "Auto" is selected as a recording mode, the unit
calculates how much time is available on the disc and
selects the best recording mode available
automatically to complete recording the program.
8
Press [OK] when all items are
entered•
After displaying a warning message for 10
seconds, timer program list will appear.
@
S
©
3>
@
©
D
©
Use [A / •] to select the recording
media ("DVD" or "VCR"), then
press
[p,-].
e.g.) recording to DVD
9
Your program setting is now stored.
• To set another program, repeat steps 2 to 8.
• To exit, press [TIMER] or [SETUP].
• When 2 or more programs are overlapped,
"Timer program overlapped" appears, and the
overlapped program will be displayed in blue.
• To correct the timer program refer to
"Checking, canceling, or correcting the timer
programming information" on page 44.
Press [TIMER SET] to set a timer
programming•
will appear on the front panel display.
£
<
I£
i£
©
EN 43 i