Table of Contents
Advertisement
6.
Change
yourTV
installation
The first time you switch
on your TV you select the language
for the TV
menus
and make basic choices
for picture
and sound
settings.
Use this
chapter
to reinstall
the TV, to set preferences
in the TV menus, or to
tune
new TV channels.
6.1
Select
your
menu
language
1.
Press MENU
on the remote
control
and select
Installation
>
Language.
Installation
Language
3.
If you have forgotten
your PIN, reset
it as described
in Set or change
your PIN on page 17.
Select
Cable
or Antenna
and press
OK.
• When
Antenna
is selected,
the TV detects
antenna
signals.
It
searches
for NTSC
and ATSC channels
available
in your area.
• When
Cable
is selected,
the TV detects
signals supplied
by cable.
It searches
for NTSC,ATSC,
and QAM modulated
channels
available
in your area.
_VO_
TV installation
2.
Select a language and press OK to confirm
your choice.
3.
Press _1to return to the Installation
menu.
6.2
Set
your
location
to
home
You can set the location
of your TV to Home
or Retail
store.
Choosing
Home
gives you full flexibility
to change
predeflned
settings
for picture
and sound.
1.
Press MENU
on the remote
control
and select
Installation
>
Preferences
> Location.
2.
Select Home
and press
OK to confirm
your choice.
3.
Press _1 to return
to the Installation
menu.
6.3
Tune
channels
automatically
This section
describes
how to search for and store
channels
automatically.
Before
you tune
channels,
ensure
that you are registered
with your cable TV provider
and that your equipment
is correctly
connected.
1.
Press MENU
on the remote
control
and select
Installation
>
Channels
> Autoprogram
> Start
Now.
= TV...... IInstallation
MAGNAVOX
Channels
Autoprogram
Autoprogram
When
autoprogramming
is complete,
this message appears
"Channel
search
completed".
4.
Follow the on-screen
instructions
to complete
the installation.
6.4
Optimize
the signal quality from
your antenna
You can optimize
your signal quality by tuning in ATSC channels with
weak signals, and adjusting the antenna.
1.
Press MENU
on the remote control
and select Installation
>
Channels
> Installation
mode.
2.
Select
Antenna
and press
_1 to confirm
your choice.
3.
Press A and _ to enter
Weal{
channel
installation.
4.
Highlight a channel
from the list of TV channels
and press
the green
color
button
on the remote
control.
The signal strength
for the channel
is displayed.
5.
Adjust your antenna
to maximize
the signal strength.
6.
Press MENU
to exit.
Press OK to start
the installation.
If you run Autoprogram
when
you have locked
channels,
a
message
appears
asking to enter
your PIN code.
Enter your PIN
code in order
to complete
the installation.
EN-23
Advertisement
Table of Contents
