Tv/Cable Tv - Magnavox 20MS3442/17 Owner's Manual

It is important for the TV to know what type
of signal-Cable TV (CATV) or a normal
antenna-you are using. To tell the TV whether
you are using a cable TV signal, setTV/CATV
to TV or CATV as follows.
Press MENU to see the menu.
2 Press VOL+ or VOL-to highlight
(Preset).
3 Press CH-to enterPresetsubmenu.
TV/CATV is highlighted.
Press VOL+or VOL-to selectTVor
CATV.
Choose CATV if you have CableTV
service. (See page five for connection
details.) Ifyou donot have CableTV
service and you connected an antenna
to the TV, choose TV. (See page six for
connection details.)
S Press MENU repeatedly to remove
themenufromthescreenorthemenu
will automatically disappear within a
few seconds if no buttons are pressed
on the remote control.
TV/CATV TV
_44
TV/CATV CATV
¸
When CATV is selected, ch-
annels 1-125 are available.
When TV is selected, only
channels 2-69 are available.
You cannot select Preset if
the TV is set to AVl/S-video,
AV2, orYUV. Press TV/AV
repeatedly to get to the TV
channels.
11