Table of Contents
Advertisement
PLAYBACK
Make
sure ...
• Turn on the TV and set the TV channel to the same
video output channel as located on the back of the
VCR. (CH 3 or 4)
• Press TV/VCR button so that "VCR" appears on the
display.
1 Insert a prerecorded tape
Counter mode appears at counter 0:00:00 on the TV
screen. If the erase-protection tab has been removed, the
VCR will start playback automatically.
2
To begin playback
Press PLAY button.
lf a tape is already in the VCR
2A)
Using button on the VCR
Just press PLAY button on the VCR. Power will
automatically turn on and playback will start. (Direct
Button Operation)
2B)
Using button on the remote control
Press POWER button to turn on, and then press
PLAY button on the remote control.
3 To stopplayback
Press STOP button.
PICTURE SEARCH
This feature is useful in finding or skipping over a par-
ticular scene on a tape. In this mode, the sound will be
muted.
1) You may view a video tape at a high speed in either
a forward or reverse direction by pressing F.FWD or
REWIND button. (in the SP / LP / SLP modes)
2) Depress it again, the VCR will now search in super
high speed. (in the LP / SLP modes)
3) For normal speed, simply press PLAY button.
STILL PICTURE
I
You can view a still picture on the screen during play-
back (the Still mode). Press PAUSE/STILL button dur-
ing playback. "| |" appears on the display. Press PLAY
button to return to playback.
NOTE:If it is left in the Pause mode for more than five
minutes, the VCR will automatically switch to the Stop
mode.
VERTICAL HOLD CONTROL
When the picture begins to vibrate vertically, stabilize
the picture by pressing CHANNEL Aor • button in the
Still mode.
NOTES:
• When the picture is distorted or rolling vertically, ad-
just vertical hold control on your TV.
• Some latest TV's do not have a user adjustable ver-
tical hold control.
TRACKING ADJUSTMENT
• Tracking adjustment will be set automatically (Digi-
tal TRacking function) when you start playback.
"DTR" appears on the display.
NOTE: The following function is controlled only by the
buttons on the VCR.
• When playing pre-recorded tapes or tapes recorded
on units other than your own, noise lines (black and
white streaks) may appear on the playback picture. If
this occurs, you can adjust the tracking control manu-
ally by pressing CHANNEL • or • button until the
streaks disappear. To return to the DTR function,
stop the tape once and start playback again.
• You can reduce the noise lines by pressing CHAN-
NEL • or • button in slow mode, too. Slow tracking
adjustment will not be set automatically.
Note: In Still mode, press SLOW button and press
CHANNEL • or • button until the streaks disap-
pear. To retum to Still mode, press PAUSE/STILL
button again.
SLOW MOTION
I
Press SLOW button to reduce the playback speed. The
VCR mutes the sound during slow motion. You can con-
trol the speed by pressing EFWD button (faster) or RE-
WIND button (slower).
Press PLAY button to return to normal playback.
AUTO REWIND
When the end of a tape is reached
during recording,
playback,
or fast-forward,
the tape will automatically
rewind to the beginning.
After that, the VCR will eject
the tape and turn itself to off.
NOTES:
• The tape will not auto-rewind
during timer recording
or One Touch
Recording.
• When the Counter Memory is activated, the tape will re-
wind to the 0:00:00 and the VCR will be in the Stop mode.
EN
-16-
6A12
Advertisement
Table of Contents
