Sears LXI series 934.55116690 Owner's Manual page 13

The channels you no longer receive or seldom watch can
be deleted from the memory. (Of course, you can add
the deleted channel into the memory again.)
NOTE" You must use the remote control for this procedure.
Make sure ...
• VCR power must be turned on.
• Turn on the TV and set the TV channel to the same
video output channel as located on the back of the
VCR. (CH 3 or 4)
• Press TV/VCR button so that "VCR" appears on the
display.
1
Select the main menu
Press MENU button. The main
menu appears on the TV screen.
MENU
TIME R PROGRAMMING
VCR SET UP
INITIALIZE
6 Delete it from memory
Press ADD/DELETE button so that "DELETE" flashes
on the TV screen.
• To delete another channel, repeat steps [5] and [6].
• If you press ADD/DELETE button again, the chan-
nel is memorized again.
- DELETED -
7' Exit the preset mode
PressMENU buttonto return to TV mode.
NOTE: To confirm that channel(s) has been deleted or
- MEMORIZED -
2 Select"INITIALIZE"
Press CHANNEL • or • button
repeatedly to point to "INITIAL-
13MER PROGRAMMING
VCR SET UP
INITIALIZE
added, press CHANNEL • or • button.
MENU
TIMER PROGRAMMING
VCR SET UP
INITIALIZE
Press MENU button. The main
1 Select the main menu
IZE".
Then, press SELECT button.
3
Select "CHANNEL SET UP"
Press CHANNEL • or • button
repeatedly to point to "CHAN-
NEL SET UP".
Then, press SELECT button.
INITIALIZE
CHANNEL SET UP
SETTIt4G CLOCK
LANGUAGE SELECT
menu appears on the TV screen.
2
Select "INITIALIZE"
Press CHANNEL • or • button
repeatedly to point to "INITIAL-
IZE".
Then, press SELECT button.
MENU
TIMER PRCGRAMMING
VCR SET UP
_ NITIALIL;'E
4 Select "ADD/DELETE CH"
Press CHANNEL • or • button
repeatedly to point to "ADD/DE-
LETE CH".
Press SELECT button.
CHANNEL SET UP
/V IONJ
CAW
ADD/DELetE CH
5 Enter the desired channel number
_m_D_mdlD%11 ELETE CH '_ Press the number buttons or ,-_.,_
CHANNEL • or • button re- "_,'_
peatedly until your desired chan-
nel number appears. (Example:
CH02)
3
Select "CHANNEL SET UP"
Press CHANNEL • or • button
repeatedly to point to "CHAN-
NEL SET UP".
Then, press SELECT button.
INITIALIZE
CHANNEL SET UP
SETTING CLOCK
LANGUAGE SELECT
4 Select "TV" or "CATV"
CHANNEL SET UP
Press CHANNEL • or • button _ _, to,_
CAW
repeatedly to point to "TV" or ..........
"CATV".
5 Begin channel preset
Press SELECT button once. After scanning, the tuner
stops on the lowest memorized channel.
- 13 - EN
6A12