Typical Installation - GE GXSH40V Owner's Manual And Installation Instructions

Installation Instructions.
TYPICAL INSTALLATION
Hard Water
to Outside
Faucets
Incoming- _
Hard Water
_ Plug-in
Transformer
/I
\
k
To
Controller
Elbow
Valve
Hose*
Top
Cc
Main Water Pipe
Conditioned
Water
Ground Clamp Clip.s
)ass Valve
Assembly
)verflow Drain InJet _,_£q
Elbow ._/_
Salt Storage Tank "_¢L(.__(_
H°Lue;ricatedJ
O-ring _"
Secure Valve Drain Hose
in place over Floor Drain
Ground
Clamp
1 /Pipe
2" NPT Sweat
JAdaptor (not
t _included)
l" NPT
Threaded
Adaptor
O-ring
)ass
Valve
Figure 7
*Do not connect the water
1-1/2"
softener valve drain hose
to the salt storage tank Floor Drain air gap
overflow
Figure 6
NOTE: See "Air Gap Requirements" section.
• Remove plastic shipping plug and wire from valve outlet.
_-_2_j_ Turbine
Valve outlet
_ Turbine shaft and support
Figure 8
NOTE: Be sure the turbine and support are firmly in place in the
valve outlet. Blow into the valve port and observe the turbine
for free rotation.
11