Controls - GE AKQ12DNT1 Owner's Manual And Installation Instructions

About the controlson the air conditioner.
Features and appearance will van/.
Lights next to the touch pads on the air conditioner control panel indicate the selected settings.
Light indicatesthe unit
is ill temperature or
delay time Set mode.
NOTE: The display always shows the
roomtemperature exceptwhen setting
the Set temperature or the Delay timer.
Light indicatesthe
delay timer is set.
@
De,oyt,merand .................. i
temperatureset _ _, "_ C_ '
Decrease/Increase Power
I Dela_
Delay1-24hr _ , __d_eC:::_
o
Mode select ............................................. Sleep
j
Air Conditioner Controls Remote Control
Unit power on/off
Auto Fanon/off and
Decrease/Increase
Controls
Power Pad
Tmns air conditioner on and ore _,qlen
turned on, tile display will show tile room
temperature.
DisMay
Nlows tile room mmpemmre or time
remmning on file Delay diner. Shows tile SOt
temperature wlfile setting tile temperature in
Cool or Energy Saver modes. The SOtlight will
mrn on while setting.
@
NOTE: The display will change to show the
room temperature
after settings have been
made. To recN1 tile SOt mlnpemmre, press tile
romp Increase A or Decrease V pads.
Tamp Increase A / Decrease T Pads
Use to set temperature
when in Cool or Energy
Savermode. Tile Set light will turn on while
setting. Hold down bodl die up and down
pads for 5 seconds to change the display
belween Fahrenheit and Celsius.
Delay Timer Increase A / Decrease V Pads
Each touch of the Increase A/Decrease V
pads on tile unit or on tile relIlote
conUol
will
set the delay time when
using tile Delay 1-24hr
time_: The Sot light will turn on while setting°
O an SpeedPad
Use to set tile fan speed
to LOW,
Mad, High
or AutO on tile unit.
NOTE:
On tile remote
control, use tile Fan button to set tile f_m
speeds to lOW,
ivied, High
or Auto.
O ode Pad
Use to set the air conditioner to Cool, Energy
Saveror Fanmode.
@
Delay Pads
Delay
ON--When tile air conditioner is off; it
can be set to automatically come on in 1 to 24
hours at its previous mode and tim settings.
Delay OFF--When tile air conditioner is on,
it can be set to automatically mrn off in 1 to
24 ]louis.
How to sot'.
Press die Delay 1-24hr pad on tile unit or on
the relilOm control. Each touch of tile Increase
A/Decrease V pads on tlle unit or on tile
remora conuol will set tile diner in 1/2-hem
inmrva/s until tile time reaches 10 ]lom_; then
it will increase in 1-hour inmrva/s. The Set
light will mrn on while setting.
To review the reInaining
time on the Delay
1-24hr time_; press tile Delay 1-24hr pad on
tile tlnit or on tile relnote contiol. Use tile
Increase A/Decrease Y pads on tile unit or
on the remote control to set a new time if
desired.
Tocancel the timer, press tile Delay 1-24hr pad
undl tile light on tile Delay #-24hr pad goes off.
4