GE 21 Owner's Manual page 4

About the controls with temperature settings.
Control style A, Internal Controls (on some models)
(FIG A) (FIG B)
Control styles A, B & D (on some models)
r_q
_" ENERGY SAVER ON
Control style C, LCD External Controls (on some models)
i--i
i Loc_
iiC ........i
Hol_ 3 co_>d_,
$ioo o1
......o=_ _o........
,===, _ ,===,
Control style D, External Controls (on some models)
NOTE: The refrigerator is shipped with protective film covering the temperature controls.
If this film was not removed during installation, remove it now.
The temperature controls are preset in the factory at 37°F for the refrigerator compartment and O°Ffor
the freezer compartment. Allow 24 hours for the temperature to stabilize to the preset recommended
settings.
The temperature controls can display both the SETtemperature as well as the actual temperature in the
refrigerator and freezer. The actual temperature may vary slightly from the SETtemperature based on
usage and operating environment.
Setting either or both controls to OFF stops cooling in both the freezer and refrigerator compartments,
but does not shut off electrical power to the refrigerator.
4