GE GTDS855ED0MC Owner's Manual page 7

GEAppliances.com
Temperature
High For regular to heavy cottons.
NOTE:Steam Dewrinkle and Steam Refresh require the High temperature setting.
Medium For synthetics, blends, delicates and items labeled permanent press.
Low For delicates, synthetics and items labeled tumble dry low.
Extra Low For delicates, synthetics and items labeled tumble dry low.
No Heat For fluffing items without heat. For use onlywith the Timed Dry cycles.
Q Options
Delay Dry
®
As the Delay Dry button is repeatedly pressed,the delay time sets to from 1 to 9 hours, and back to clear (0).After selecting
the delay time, press Start and the delay time will count down the time remaining until the cycle starts.
If the Delay Dry button is pressed for 3 seconds, it clears (regardless of the delay time) or terminates a delaying cycle.
Extended Tumble
Use this option to minimize the wrinkles in clothes. It provides 1 hour of no-heat tumbling after the clothes are dry. If you are
using the cycle Signal and you select the Extended Tumble option, a signal will sound at the end of the drying time and every
5 minutes during the Extended Tumble cycle. This will remind you that it is time to remove the clothes.
Damp Alert
This option causes the dryer to beep when clothes have dried to a damp level. Remove items that you wish to hang dry. The
Damp Alert will only beep when this option is selected(but the dry cycle will keep running).Removingclothes and hanging them
when they are damp, can reduce the need to iron some items. The light beside the button will be lit when Damp Alert is on.
Rack Dry
Rack Dry is only allowed for timed cycles (Timed Dry & Quick Fluff).The light turns off if cycle knob isturned to a non-timed cycle.
My Settings v
As the cycle selector knob is turned, the Time (TimedDry),Level (DrynessLevel),and Temp (Temperature)settings change to
automatic pre-set default settings. If you desire a different setting, press the appropriate button(s).Thenpress and hold the
My Settings button for 3 seconds.Thestatus heart and button lights will turn on and the dryer will savethese settings for that knob
selection.Inthe future, when you turn the selectorknob to that cycle,your settingswill be automatically recalled
Totemporarily (forthis loud) return to the pre-setdefault settings,depressthe My Settings button for 1/2 second.The status heart
and button lightswill turn off and the options will change back to these defaults.To make these default settings permanent,hold the
My Settings button again for 3 secondsto make them your preferred settings (thelights will turn back on).
NOTE:Variable Signal volume cannot be set for My Settings,
Variable Signal q_))
Use the Variable Signal button to change the volume of the end of cycle and control signals. Pressthe button until you reach
the desired volume (low-me&high) or off. The clothes should be removed when the beeper goes off so wrinkles do not set in.
NOTE:
• Removegarments promptly at the sound of signal. Placeclothes on hangers so wrinkles will not set in.
• Usethe Variable Signal especially when drying fabrics like polyester,knits and permanent press.These fabrics should be
removed so wrinkles will not set in.
Drum Light ":_
The drum light will go on if the Drum Light button is pushed or the door is opened. It will stay on until the door is shut or the
Drum Light or Power button is pushed.
Control Lock i_
You can lock the controls to prevent any selections from being made. Or you can lock the controls after you have started a
cycle. Children cannot accidentally start the dryer by touching buttons with this option selected.
To lock the dryer controls, press and hold the Control Lock button for 3 seconds.Thecontrol lock icon will light up when locked.
To unlock the dryer controls, press and hold the Control Lock button for 3 seconds.
NOTE:The Power button con still be used when the machine is locked.
O eDry
Available for Bulky Items, Towels/Sheets, Cottons, Normel/Mi×ed Loeds, Jeans, Cesuels/Permenent Press,Active Wear,
and Delicetes. When the eDry button is pressed,cycle settings change to reduce the total energy consumption of the
selected sensor cycle. NOTE:Cycletimes will change when eDry is selected.
The eMonitor lights display the relative energy use of your selected cycle and options. They are provided as an energy guide
and range from Good (1 light) to Better (5 lights).Cycle (time),dryness level, temperature, and additional tumble options can
increase or decrease your energy efficiency. Some special cycles will not provide a display.
7