GE Monogram Owner's Manual page 19

Replacing the Light Bulbs
Stainless Steel Refrigerator
Fresh food
comportment--
upper light
Setting the controls to OFF does not remove
power to the light circuit.
1
2
Unplug the refrigerator.
The bulbs are located at the top
of the compartment, inside the light shield.
To remove the light shield, pull forward
on the shield to disengage the tabs at the back
of the shield. Pull down to remove the light
shield.
After replacing the bulbs with appliance
bulbs of the same or lower wattage, replace
the light shield. When replacing the light shield,
set the front tabs into the appropriate slots
in the front of the shield housing and pull
forward to seat the tabs at the back
of the shield into the housing.
5 Plug the refrigerator back in.
Tabs
Freezer light
CAUTION: Li U bulbs moy be not.
Setting the controls to OFF does not remove
power to the light circuit.
1 Unplug the refrigerator.
2 Removethe freezer basket for access.The bulb is
located at the rear of the freezer inside a light
shield.
3 To remove, grasp the shield at the top and pull out
to release the tabs at the bottom.
4 After replacing with an appliance bulb of the
same or lower wattage, replace
the shield and freezer basket.
5 Plug the refrigerator back in.
Light
Shield
\
Appearance may vary
19