GE Monogram Owner's Manual page 15

Additional Features
Stainless Steel Refrigerator
Door swing
clearances
The doors are factorg set for a 150°
door swing. To avoid contact damage
to the refrigerator doors or to adjacent
cabinetrg or walls, observe the minimum
clearances shown.
• Allow/4" clearance on each side
to an adjacent wall for a 90° opening
and access to drawers.
• Allow 15" clearance on each side
to an adjacent wall for removal of drawers.
IE i_1
150 ° Door Swing ,
90° DoorSwing 24-5/8"
I | I
_ i JL _ :
ii ........ ii 1 -1,16,,
/ " 1
....... !i
Door
alignment
If the top of the doors are uneven, first trg to raise
the lowest door bg turning the leveling leg on
the same side as the door until the doors are
even. If the unit rocks, re-adjust the leveling
legs to the extent that the unit is stable.
\ .
Leveling
Leg
If the doors remain uneven, turn the adjustable
pin to raise, or lower, the left door to match
the right door. Use a 1/4 Allen wrench
to turn the pin.
Adjustable Pin
15