GE Monogram ZVB30 Owner's Manual page 8

Before You Call For Service...
Downdraft Vent System
Save time
and money!
Review the
troubleshooting
tips on this page
first and you
may not need to
call for service.
PROBLEM POSSIBLE CAUSE
FAN DOES ,The vent is not fully extended. Press the ON/OFF pad.
NOT WORK
VENT DOES
NOT WORK
.The vent is not plugged into an outlet. Plug the vent into a 120V
power outlet.
.The raise/lower pad did not engage the lift motor. Hold down the
pad for a couple of seconds to activate the motor.
.The circuit breaker may have tripped. Check the circuit breaker-
reset if necessary.