GE Appliances JGBS04 Owner's Manual And Installation Instructions page 38

Installation Instructions
DIMENSIONS AND CLEARANCES
Provide adequate clearances between the range and adjacent combustible surfaces. These dimensions must be
met for safe use of your range. The location of the electrical outlet and pipe opening (see Gas Pipe and Electric
Outlet Locationsl may be adjusted to meet specific requirements.
The range may be placed with 0" clearance (flush) at the back wall.
For island installation, Model JGSS05, maintain 2-1/2 in. minimum from cutout to back edge of countertop and 3 in.
minimum from cutout to side edges of countertop.
8"-
Minimumto
cabinets on
either side
of the range
3 0"
30"
Minimum
'_ -l" to wall on either side
standard burner mad
-2" to wall on either side
sealed burner models
Maximum
depthfor
cabinets above
countertops
J_LJ£
dll Front edge of
To cabinets Ill the range side
below II! panel forward
JJl from cabinet cooktop and=,_, r_- 0" 36"
at the range 1/4" _'_""__'_ -
back
0" (minimum)
To cabinets below
cooktop and at the
range back
Height Model
36" JGSS05
46-7/8" JGBS04
JGBS07
44" RGB524
Depth with door closed (includesdoor handle)
Depth varies depending on model.
Seespecifications sheet for your model.
Depthwith door open:
Glass door
46-3/8" \ _'_ "_
Porcelain door
46-1/4" \ "__" _'_
38