Specifying The Scaler - Panasonic TH-50VX100W Operating Instructions Manual

Specifying the scaler

This menu can be used to specify whether the built-in scaler or an external scaler is used for scaler functions such
as resizing and picture quality adjustment.
The setting is valid with the following input signals.
1125 (1080) / 24p•25p•30p•50p•60p
1
Display the menu screen.
2
Select "Setup".
Picture
Setup
Pos. /Size
Sound
3
Select "External scaler mode" and set.
Signal
Screensaver
Component/RGB-in select
External scaler mode
Power save
Standby save
Power management
Auto power off
OSD design
OSD position
OSD Language
4
Exit the menu.
RGB
Off On
Off
Off: Use the built-in scaler.
Off
On: Use an external scaler.
On
Off
Note:
Off
Selecting "On" in this setting deactivates the following settings and
Type1
Upper left disables these operations.
English (UK)
Pos. /Size menu: H-Size, V-Size, 1:1 Pixel Mode, Display size
Picture menu:
Advanced settings: Cinema reality, Noise reduction (see page 23)
Signal menu:
Options menu:
ASPECT Controls (see page 17)
"EXT. SCALER" is displayed in the menu screen to indicate that an
external scaler is in use.
Normalise
Picture Mode
Contrast
Brightness
Colour
Hue
OK
2
select
1
change
2
select
1
(see page 30, 31)
Brightness, Colour, Hue, Sharpness, Memory save,
Memory load (see page 21, 25, 26)
XGA Mode (see page 39)
All Aspect (see page 41)
EXT.SCALER
Normal
25
or
Signal
Screensaver
Component/RGB-in select
RGB
External scaler mode Off
Power save Off
Standby save On
Power management Off
Auto power off Off
OSD design Type1
OSD position Upper left
OSD Language English (UK)
35