External Scaler Mode - Panasonic TH-103VX200U Operating Instructions Manual

EXTERNAL SCALER MODE

OFF ON
This menu can be used to specify whether the built-in scaler or an external scaler is used for scaler functions such as
resizing and picture quality adjustment.
The setting is valid with the following input signals.
1125 (1080) / 24p·25p·30p·50p·60p
OFF: Use the built-in scaler.
ON: Use an external scaler.
Note:
If "ON" is set when other than corresponding signal is input, "Input signal must be 1125p(1080p)"message is displayed.
Using Remote Control
Each time you press
EXTERNAL SCALER MODE ON
Note:
Selecting "ON" in this setting deactivates the following settings and disables these operations.
POS. /SIZE menu:
PICTURE menu:
ADVANCED SETTINGS:
SIGNAL menu:
OPTIONS menu: All Aspect (see page 56)
ASPECT Controls
(see page 22)
"EXT. SCALER" is displayed in the menu screen to indicate that an external scaler is in use.
NORMAL IZE EXT.SCALER
PICTURE MENU STANDARD
PICTURE 25
BRIGHTNESS
COLOR
TINT
, an external scaler is activated or deactivated.
H-SIZE, V-SIZE, 1:1 PIXEL MODE, DISPLAY SIZE (see page 29, 30)
BRIGHTNESS, COLOR, TINT, SHARPNESS, MEMORY SAVE, MEMORY LOAD
(see page 32, 38, 39)
3:2 PULLDOWN, NOIZE REDUCTION (see page 34)
XGA MODE (see page 48)
SET UP menu
45