Advertisement
Installation of frame rate converter
If variable frame rate (over 60p/50p mode) is used
If overcrank/undercrank shooting was done using variable
frame rate and over60p mode, you will not be able to
execute slow/quick playback without using a frame rate
converter.
Therefore, you will need to install the frame rate converter
plug-in for Final Cut Pro. The frame rate converter plug-in
is included in the Final Cut Pro 5.1 (or Final Cut Studio)
installation disk.
* In the case of native mode recording (24pN, 25pN, and 30pN),
you can directly edit the captured data.
Examples of exporting data from FCP
• Writing AJ-HD1400 via IEEE1394 connection
• Writing to a professional HD deck, via PCI card video interface
(such as Decklink by Blackmagic, or Cona by AJA) capable of HD-SDI output
• Tapeless, lossless direct data conversion using Apple Compressor
(for webcasting format such as H.264, MPEG2 for DVD, and various other data conversion)
Mac Pro & FinalCutPro
(With PC card interface)
* For webcasting, progressive mode shooting is recommended.
HD-SDI
Professional Use
HD VTR
IEEE1394
AJ-HD1400
Aple Compressor
Linear HD Editing
HD/Digital
Post Production
DVD
H.264
Web
22
Advertisement
