Advertisement
P2HD
AG-HPX502
X
PRACTICAL GUIDEBOOK
From P2 to non-linear editing workstation
Ingesting procedures using
Apple's Final Cut Pro (ver.5.1.4)
In this section, Apple's non-linear
editing system Final Cut Pro is
featured to show you examples of
editing data from P2 card(s).
Mounting P2 card onto the computer's operating system via AG-HPX502
1.From the SETUP menu, select
OTHER FUNCTIONS
PC MODE
2. Press the camera's MENU button twice, to exit from the menu mode.
3. Press the function mode button to turn the MCR lamp on. Press and hold the button (for more than 2 seconds) to enter the PC mode.
DEVICE CONNECT is displayed; P2 card is mounted, with its icon appearing on the desktop.
* If the P2 card icon does not appear on the Desktop
Application
Utilities
Disk Utility (as shown in the screenshot).
In the left column, select the P2 card marked with gray,
then click Mount.
Note: In order to mount the PC card using the PowerBook's
PC card slot, you will need to install the P2 card driver.
19
9
From P2 to non-linear editing workstation
followed by
1394 DEVICE
Note: To exit PC mode, unmount (eject) the P2 card on the Desktop, and turn the camcorder off.
Advertisement
