Panasonic P2HDXAG-HPX502 Manual Book page 18

P2HD AG-HPX502
X
PRACTICAL GUIDEBOOK
Using P2 Cards
Recorded images can be checked on the AG-HPX502's
LCD monitor as thumbnails of each file.
Basic thumbnail operations
Select MCR mode
by pressing mode button.
Press MENU button to display thumbnail menu.
(MENU buttons are located under inside of
LCD and front side of the camera.)
Use the
(The yellow frame indicates the selected thumbnail.)
Playing back selected file
Select the thumbnail you want to play and press the
Note)You need to set the same recording form at as the clip you
want to play.
Select Slot
Follow the procedure below to select which of the four P2 card
slots on the AG-HPX502 will be used for playback.
Press the MENU button
on the thumbnail screen.
In the menu, press the
THUMBNAIL and then press the
Then, from the same menu, press the
SHOT CLIPS
8
Using P2 Cards
or button to select a thumbnail.
or button to select
and select the slot you want to use.
button.
button.
or button to select