Advertisement
Procedure for using VFR (required settings)
1. Set the camera mode to FILMCAM.
CAMERA MENU
SCENE FILE
OPERATION TYPE
Select the "FILMCAM"
2. Set the recording mode to 720p. (VFR effect can only be seen instantly in Native mode.)
RECORDING SETUP
REC FORMAT
Select any of 720p modes.
3. Set the frame rate to one of rates between 12 and 60(50).
SCENE FILE
FRAME RATE
Select frame rate.
(Frame rates between 12 and 60(50) can be set.)
With these 3 steps, you are ready to shoot in VFR mode. Note also that during Progressive shooting in modes other than
Native mode, the camera records in the over60p format, so that on-site (camera output) slow- or quick-motion video checking
or monitor checking is not possible.
14
Advertisement
