Mazda CX-9 Owner's Manual page 450

CX-9_8CM9-EA-12I_Edition1 Page450
Thursday, September 13 2012 2:39 PM
In Case of an Emergency
Flat Tire
3. Remove the cover.
Cover
4. Attach the socket to the spare tire
carrier bolt, the jack lever to the socket,
and the lug wrench to the opposite end
of the jack lever.
Lug wrench
Jack lever
Socket
Bolt
7-6
Form No.8CM9-EA-12I
Black plate (450,1)
5. Slowly turn the lug wrench
counterclockwise until the spare tire
reaches the ground and the cable
becomes loose.
Spare tire
CAUTION
Do not loosen the cable too much as
this may cause damage to the spare
tire carrier.
6. Rotate the small lever on top of the
retaining plate and pull the retaining
plate out from the center hole of the
tire.